Abstract
In this article, an experimental study was conducted to examine the effect of curing time and microwave power on the compressive strength of early microwave-cured slag based geopolymers. Geopolymers have the potential to serve as an environmentally friendly substitute for cement-based building materials, and the use of microwave curing to geopolymers holds the promise of substantial strength improvement. Different microwave curing energies (300 - 800 Watts) were utilized at varying durations (10 - 60 minutes) on demoulded mortar specimens after one day. After that, compressive strength tests were conducted on both the cured and uncured specimens at three different ages: 1, 7, and 28 days. Results indicated that microwave curing could increase the strength about 10 times (36,47 MPa) in 1 day which is almost equal to the 28 days strength of uncured specimens. Based on the performed SEM-EDX results and visual inspections there may be a correlation among EDX results, color changes and compressive strength values. High energy level such as 800-Watt caused decay in samples and durability problems by decreasing the strength at late ages; Therefore, it is recommended to not apply such high energies to slag-based geopolymers.
Recommended Citation
Taşdemı̇r, Ahmet and Çevı̇k, Abdulkadir
(2025)
"Influence of Early Microwave Curing on Performance of Slag-Based Geopolymer Mortars,"
Journal of Sustainable Construction Materials and Technologies: Vol. 10:
Iss.
4, Article 8.
https://doi.org/10.29187/2458-973X.1198
Available at:
https://commons.yildiz.edu.tr/jscmt/vol10/iss4/8
Included in
Biomaterials Commons, Chemical Engineering Commons, Civil and Environmental Engineering Commons, Engineering Science and Materials Commons, Materials Science and Engineering Commons, Mechanical Engineering Commons, Molecular, Cellular, and Tissue Engineering Commons
