Most Recent Additions*
Curing Duration Optimization to Reduce Shrinkage Cracking in One-Part Alkali-Activated Slag Concrete
A. Sadrmomtazi and H. Zanganeh
Laboratory Investigation and Numerical Modelling Effect of Carbon Nanotubes on Hot Mix Asphalt Permanent Displacement
Sepehr Saedi and Auwal Usman Nadada
Influence of Early Microwave Curing on Performance of Slag-Based Geopolymer Mortars
Ahmet Taşdemı̇r and Abdulkadir Çevı̇k
Durability of Alkali-Activated Concretes Under 5% Sulfuric Acid Environment
Celal Karabaş and Anıl Niş
Comprehensive Risk Assessment for Construction Site Managers in Kosovo: A Mixed-Method Approach
Muhamet Ahmeti and Besian Sinani
Behaviour of Internally Strengthening Hollow Stainless-Steel Hot-Rolled Circular Columns Filled With Crumb Rubber and Recycled Aggregate Concrete
Wadhah M. Tawfeeq, Mohammed M. Rasheed, Mithaq Kohees, Ahmed W. Al Zandd, Saif Al-Balushi, and Hamed Al Abdul Salam
Piezoelectric Concrete: A Smart Material Approach for Energy-Harvesting Structural Technologies
Dianah Mazlan, Vynotdni Rathinasamy, Naveen Kumar, Liu Chunpeng, and Elango Elango
Scientific Characterization of Historic Mortars Dating From the 15th-Century of a Historical Building in Algeria: A Case Study
M. E. Belgacem, N. Rabahi-Touloum, R. Neves, and Y. Ouldkhaoua
Nonlinear Analytical Models of the Seismically Isolated ``Frame-Boiler'' System with Cantilever-Type Hysteresis Dampers
Aleksandr Mikhailovich Anushchenko, Dmitrii Evgenievich Bondarev, and Aleksandr Yurievich Schukin
Advancing Sustainable Structural Solutions: Hemp Fiber-Reinforced Polymer (HFRP) Reinforcement Bars for Concrete Applications through Material Selection, Simulation, and Pathways for Future Development
Thomas Cadenazzi and Busra Keles
Comparative Analysis of Life Cycle Assessment of Traditional and Contemporary Timber Buildings
Sadık Akşar and Gökçe Tuna
Sustainable Paving Block Development: Utilizing Rejected Coal as Filler and Assessing its Impact on Paving Block’s Properties
Siti Nikmatin, Allen Kurniawan, Heriansyah Putra, Rima Fitria Adiati, Riawan Ma’ruf, and Dwi Arso Yedi Irwanto
Numerical Comparative Study of the Thermal Performance and Load-Bearing Capacity of Hollow Clay Bricks Used in Construction in Libya
Osama Lawej, Mahmoud Ahmed, and Ismael Ehtiwesh
Developing a Modular Circular Wall Over-Clad System for Facade Thermal Upgrade in Deep Energy Retrofit
Patrick Daly
Ceramic Waste as Sustainable Material in Self-Compacting Concrete: Experimental Study and ANN Predictive Modeling
Abderrezak Bouziane, Houssam Slimanou, Mohamed Amin Bouzidi, and Nedjima Bouzidi
Comparative study on the performance of GGBS, UGGBS, and RHA-incorporated cement mortar mixes
Devansh Goel and Sudarshan D. Kore
*Updated as of 01/17/26.